SAE J1596 Automotive V-Ribbed Belt Drives and Test Methods

作者:标准资料网 时间:2024-05-21 08:58:54   浏览:9232   来源:标准资料网
下载地址: 点击此处下载
Product Code:SAE J1596
Title:Automotive V-Ribbed Belt Drives and Test Methods
Issuing Committee:Belt Drive (Automotive) Systems Committee
Scope: The following information covers engine accessory drive layout details and testing methods and includes test configurations, pulley diameters, power loads, and guidance for interpreting test data. This information has been prepared from existing literature, including standards and data supplied by both producers and users of V-ribbed belts.
下载地址: 点击此处下载
【英文标准名称】:Railwayapplications-Track;Rail-Part1:Vignolerailwayrails46kg/mandabove;GermanversionEN13674-1:2003
【原文标准名称】:铁路设施.轨道.钢轨.第1部分:46kg/m及以上的丁字形铁道钢轨
【标准号】:DINEN13674-1-2003
【标准状态】:作废
【国别】:德国
【发布日期】:2003-12
【实施或试行日期】:
【发布单位】:德国标准化学会(DIN)
【起草单位】:
【标准类型】:()
【标准水平】:()
【中文主题词】:高速列车;丁字形钢轨;轮廓;极限偏差;高速;训练;材料;质量管理;合格;试验;铁路设备;生产;化学成分;对称的;规范(验收);铁路;公差(测量);符号;裂开;定义;重量;尺寸;验收检验;铁道车辆;静力学;钢轨;钢;硬度;轨道(物料装卸设备);轨道;铁路钢轨;平底钢轨;残余应力;抗拉强度;顺序示度;铁路建造;作标记;材料试验;铁路设施;钢的等级
【英文主题词】:Acceptanceinspection;Chemicalcomposition;Cracking;Definition;Definitions;Dimensions;Flat-bottomrails;Hardness;Highspeed;Highspeedtrains;Limitdeviations;Marking;Materials;Materialstesting;Orderindications;Permanentways;Production;Profile;Qualifications;Qualitymanagement;Rails;Railwayapplications;Railwayconstruction;Railwayinstallations;Railwayrails;Railwayvehicles;Railways;Residualstresses;Specification(approval);Statics;Steelgrades;Steels;Symbols;Symmetrical;Tensilestrength;Testing;Tolerances(measurement);Tracks(materialshandlingequipment);Trainings;Vignolrail;Weights
【摘要】:ThispartofEN13674specifiesflatbottomsymmetricalrailwayrailsof46kg/mandgreaterlinearmass,forgeneralandhighspeedrailwaytrackusage.Sevenpearliticsteelgradesarespecifiedgivingahardnessrangebetween200-390HBW.Therailsareeithernonheattreatedcarbonmanganeseoralloysteel,orheattreatedcarbonmanganeseorlowalloysteel.Thereare21railprofilesspecifiedinthisStandard.Tworailclassesarespecified,differinginrequirementsforstraightness,surfaceflatnessandcrownprofile.Threeclassesofprofiletolerancesarespecified.
【中国标准分类号】:S11
【国际标准分类号】:45_080;93_100
【页数】:106P.;A4
【正文语种】:德语


基本信息
标准名称:钴化学分析方法 第16部分:砷、镉、铜、锌、铅、铋、锡、锑、硅、锰、铁、镍、铝、镁量的测定 直流电弧原子发射光谱法
英文名称:Methods for chemical analysis of cobalt- Part 16:Determination of arsenic cadmium copper zinc.lead bismuth tin antimony silicon manganese iron nickel aluminum and magnesium content-Direct current arc atomic emission spectrometery
中标分类: 冶金 >> 金属化学分析方法 >> 重金属极其合金分析方法
ICS分类: 冶金 >> 有色金属 >> 镉、钴及其合金
发布部门:中华人民共和国工业和信息化部
发布日期:2011-12-20
实施日期:2012-07-01
首发日期:
作废日期:
归口单位:全国有色金属标准化技术委员会
起草单位:金川集团有限公司、北京矿冶研究总院
出版社:中国标准出版社
出版日期:2012-07-01
适用范围

本标准规定了钴中砷、镉、铜、锌、铅、铋、锡、锑、硅、锰、铁、镍、铝、镁等杂质元素含量的测定方法。
本标准对于钴中上述杂质元素含量的测定范围规定如下:对于测定工作曲线满足本标准要求的,各杂质元素的分析下限为所使用标准样品最低含量的80%,分析上限为所使用标准样品最高含量的120%;对于工作曲线局部满足要求的,选取工作曲线中满足本标准要求的部分确定各杂质元素的分析范围。

前言

没有内容

目录

没有内容

引用标准

没有内容

所属分类: 冶金 金属化学分析方法 重金属极其合金分析方法 冶金 有色金属 镉 钴及其合金